Hello everyone! It’s Beth from Bourbon Creek Crafts here today with a fun little bubble gum treat holder project!
I wanted to create a treat holder for the bubble gum pack that only used 1 sheet of 6×6 paper. I chose to use the Bubbles Galore collection #4 from the August Flavor of the Month Kit. To get a better idea of how to make this, you can watch the full process video HERE.
Start with your 6×6 piece of patterned paper and trim it at 4 inches. You will now have one piece that is 4×6 inches and one that is 2×6 inches. Trim the 2×6 inch piece down to 2×4.5 inches.
Take the 4×6 inch piece and score it at 2 3/4 inches and again at 3 1/4 inches. This creates a little folder that will be the outside of our treat holder.
For the 2×4.5 inch piece, you’ll need to score from side to side at 1/2, 1, 3 1/2 and 4 inches. Then turn the piece and score up from the bottom at 1/2 and 1 inch. You’ll have a set of 4 squares at each of the bottom corners. Trim this off to allow the pocket to fold up cleaner.
Now you can adhere your pocket to the inside of the folder! I used some Art Glitter Glue for this. Then you can embellish the outside. I added some white ribbon similar to what originally came in my August kit to hold the folder closed. Then I finished it off with some ephemera from the Bubbles Galore collection.
Thanks for stopping by today! I hope you enjoyed this fun little project and found a new way to use the fun bubble papers in this month’s kit!
I used 2 strips of the blue polka dot paper and matched them up in the middle to create a stripe across the front of my card. I stamped one of the pineapples from the stamp set and then used the water color paints from the Banana Split level add-on to give them some color. I did use one small piece of the yellow patterned paper from the In the Tropics, Collection 4 to stamp my sentiment on in the middle. To finish this card off, I added some Dandelion Yellow Nuvo Crystal Drops in the top left and bottom right corners.
For my second card, I decided to use the scraps I had left from my slimline card.
I pieced the scraps together into a grid pattern. I used another scrap of that yellow patterned paper to stamp my sentiment and added a pineapple that I stamped and colored. As a finishing touch on this card, I added some 1/2 inch circles from the yellow patterned paper to bring in more pops of yellow.
Thanks for stopping by today! I hope you are enjoying your July card kit as well!
Hello! It’s Beth from Bourbon Creek Crafts here today and I’m sharing the first sneak peek of the July 2020 Flavor of the Month kit, In the Tropics! For those of us who haven’t been able to get away for a true vacation recently, this definitely gives you those tropical vacation vibes!!🌴
I used Collection #1 (Tropical Vibes) for my card and the Mojo Monday Sketch #300 that is included on this month’s sketch sheet. I stamped the toucan onto white card stock and used the watercolor paint set that came with the Banana Split level kit to give her some color. While she was drying, I built the rest of my card.
I used three different patterns from the collection and backed them all on black cardstock to help break up the patterns. I also stamped the hibiscus flower and painted it. I used the “Toucan do anything” sentiment (how cute is that saying???) and added it onto the card with the flower. I also ended up adding a flower sequin to cover up a paint smudge near her head.🤦🏻♀️
This card was super fun to make! You can watch my full process video HERE. I hope it gives you some inspiration for your kit this month and I hope it brings you some relaxing and tropical vibes. 😎 And, if you like what you see, be sure to sign up for the kit subscription now because these kits have been selling out fast!
Thanks for stopping by today! Be sure to come back each day for more peaks at this month’s fabulous kit!!
Hello everyone, it’s Beth from Bourbon Creek Crafts here today and I have made a cute tag for my 2020 journal using the Let’s Hang Out stamp set from Collection 2 of the June 2020 kit. You can see the full process for this tag in my video HERE.
I have a journal that I’ve been documenting things that we’ve experienced over the last few crazy months and when I saw the sentiment in this stamp set, I knew I needed to add it to my journal!
I started by stamping the monkeys and monkey bars on some white cardstock. I used the stencil in the kit and some Mowed Lawn distress ink to create the grass. I used a finger blade to cut the middles out between a few of the monkey bars and then did some basic coloring on the monkey bars and the monkeys themselves.
I used the green leaf ribbon that came in the kit to weave through the openings I made between the monkey bars and then draped it down the side of the bars as well. I used a scrap of paper from the On the Playground collection for my tag base because I liked how the light blue looked a little like the sky in the background. I stamped my sentiment at the top of the tag and added angles on the top corners to give it that tag shape. I used the rest of the leaf ribbon at the top of my tag to finish it off. I think it’s such a fun element to add to my journal!
Thanks for stopping by today! I hope you enjoyed this little project!
Hello everyone! It’s Beth here today with 4 more cards from the Pond Life collection from the June 2020 Flavor of the Month Kit! This kit is sold out, but the Pond Life paper collection is sold individually. You can see my full process video as well as links to all of the products I used HERE.
For my first card, I wanted to use the cute frog patterned scrap I had left as a focal point (how cute is that paper??). So I took the piece of the green polka dot pattern that I had left and offset it to the left on the front of my white cardbase. I added the cattail pattern scrap and the frog pattern scrap off to the right. I used the “you are toadally awesome” sentiment (my favorite) from the Pond Life stamp set on white cardstock, punched it out with a circle punch and then backed it with a brown cardstock scalloped circle. I ended up punching some small circles out of brown cardstock to act as brown enamel dots to finish off the card.
I used some of the remaining scraps I had to piece together this card front. I decided to leave a little white boarder around each of the pieces, so I cut them just shy of the measurements listed on this sketch. I like how the white separates the busier patterns. I I used the piece of the sailboat paper I had left as my focal point in the center of the card and backed it with white. I added my sentiment piece with the sailboat and “hope you are doing well” sentiment from the stamp set. Then I finished off this card with some of the yellow daisy flowers and peach enamel dots!
I used the last large piece of patterned paper I had, the striped piece, as my card mat on a turquoise cardbase. I backed the honeycomb strip on white cardstock to help separate it from the busy stripe behind it. Then I stamped the frog onto white card stock and did some basic coloring with my YG03 Copic marker. I stamped another sentiment from the stamp set, “you are full of life”. I backed my froggy on some turqouise cardstock. I used that same color for the strip at the bottom and then a fishtail banner at the top. I also added the last of the peach enamel dots.
I decided I had enough scraps to make one more card! So, I used the Operation Write Home sketch #154 (my favorite sketch for using up scraps!). I had 3 patterned scraps that were big enough to make 1.5 inch squares for the tiles and then I used a scrap of the green cardstock for my fourth piece. I stamped the little frog on that piece and I used the “you are toadally awesome” sentiment again. I backed my tiles on white cardstock and then added it to the green cardbase. I used a scrap strip of that striped pattern to go across the bottom and accented it with my sentiment circle.
The remaining scraps I had, I used on the insides of the cards. And that finished off this collection!
Thanks for stopping by today! I hope you enjoyed these cards and found some more ideas to use with your kit.
Hey there, it’s Beth here today! I decided to play some more with the Picnic Time collection from the June 2020 Flavor of the Month card kit, A Walk in the Park. You can view my full process video and links to products used HERE.
When I saw the strawberry and red gingham prints in this collection, I immediately thought of some pictures of my daughters picking strawberries from our garden. So, I decided to challenge myself to make a 12×12 scrapbook page, using the 6×6 papers in this collection!
I used the red gingham and turquoise polka dot papers to back my photos and then accented with the strawberry paper. I did pull a sentiment stamp from the Pond Life collection, the Be Full of Life sentiment, to stamp on my yellow tag made from a scrap of the yellow polka dot paper. I added some scrap strips I had left over to the left side of the page and cut them into fishtails. I did the same for the top right corner of the page. Then I finished off the layout with some letter stickers from my stash and sequins that came with the Banana Split Level goodies from this kit.
I had one full sheet of paper left, that yellow gingham, so I used it as my card mat on a red cardstock cardbase. I added the turquoise and red heart pattern piece (my next largest scrap) in the center. On the left side, I added a thin strip of white cardstock to anchor the fishtail banners. I used scraps I already had as the fishtails (I only used 3 instead of the 4 that the sketch showed). I pulled another sentiment from the Pond Life collection (for some reason those were fitting better with my projects today), Hope You are Doing Well, and stamped it on a scrap of white cardstock. I ended up using a corner rounder on all 4 corners to give it a softer and rounder look. Then I added some of the clear enamel dots that came in the Picnic Time collection.
As I was looking at the scraps I had left, I decided I could piece together one more card.
I used a black cardbase this time and pieced together several of the scraps I had left into a grid-like pattern. I used a tag die (from a previous FOTM kit) and topped it with one of the ant ephemera pieces and the Missing You sentiment from this kit’s stamp set. I popped this tag up on some foam squares in the center of the card. I finished this card off with the last of those clear enamel dots. And that finished off this kit!
These projects were a lot of fun and I hope they gave you some more ideas on how to use your kit!
Thanks for stopping by today! I hope you’re having a crafty day!
For my first card I used the Little Lady collection from the kit. And I used the Flavor of the Month Card Sketch from the sketch sheet. I stamped the daisy from the Little Lady stamp set, colored the centers and fussy cut them out. I also used one of the sentiments from that stamp set.
I love that rainbow sunburst pattern! I matted all of my pieces on black cardstock to help them stand out. I also used the teal ribbon that came in this collection to wrap around my pink piece on the left. I stamped my sentiment from the Weather Together stamp set and then used the pink embossing powder that came in my kit to heat emboss it. I finished it off with some sequins from the kit.
I hope you guys enjoyed my quick cards today and I hope you’re all having a crafty day!❤