I stamped and the puppy images with Memento Tuxedo Black Ink and colored with Copic Markers I used my Scan N Cut to cut the puppy images out.
I cut a panel of 110lb Neenah white cardstock to 5 1/2 X 4 inches, stamped and masked the scene stamps with Memento Tuxedo Black Ink and colored the scene with Copic markers. I was not happy with the coloring at all and ended up cutting the panel down to 5 1/2 X about 3 inches.
If you want to make scene cards but are not sure about drawing your own the “Spring Scenes” stamp set is perfect. There are so many options with this one set for perfect scenes every time.
I used the dies to cut out a border on the top and bottom of a 5 1/2 X 4-inch panel on the 5 1/2 inch side. I ended up making the panel 5 1/2 by about 3 3/4 inches.
I stamped the sentiment with VersaFine Onyx Black Ink, on a circle I cut out of white cardstock. I used my Misti to position the stamps to fit. The “& puppy dog kisses” is all one piece and I thought it would be cute to have the sentiment follow the curve of the circle instead of cutting it down. By using a stamping platform I was able to get the entire sentiment positioned and stamp it all at one time.
I used a black gel pen for the one puppy’s nose, used a white gel pen for their eyes, and added just a little Glossy Accents to the puppy’s bow and nose!
Hi Everyone! Luci here with a single layer card using the Brand New Release from SFL “Winter Fairies” and “At the Beach Sentiments” from the June 2018 FOTM Kit! How adorable are these sets!
I don’t know about you, but here in the Midwest the weather has been yucky and I’m about ready for a beach day! So I thought I would create my own.
When I saw Crystal’s card using the lights in this set I knew I needed to use them but with a tropical theme!
I made an A2 size card or 5 1/2 X 4 1/4 inches, I cut a panel to 5 1/4 X 4 inches for the scene. I made some masks for the images, and I stamped and masked as I went, using Momento Tuxedo Black Ink for stamping the images I was going to color.
I drew in lines for the cabana, horizon, and beach with a pencil before I started ink blending and then colored the images. After I finish coloring and blending I stamped and embossed the sentiment. I added the glossy accents, the Sparkle Pen for the reflection of the sunset on the water. After it dried I adhered the panel to the card base and used a black Zig Marker to outline the wires on the string lights.
This is an A2 size card or 4 1/4 X 5 1/2 inches. I used a dark brown card base from my stash. I stamped the leaves on the back of the glitter paper and scanned through my Scan N Cut, then I flipped the glitter paper over so the glitter side was facing up and let the machine cut out the images. I stamped the images of the fox and acorn from the stamp set and colored them with Copic markers (colors in the photo below). I didn’t color the leaf of the acorn because I stamped that on the back of the Glitter paper and cut it too.
Once I finished up the images I used the Lawn Fawn Knock on Wood Paper Pad and cut the back panel in orange to 4 X 5 1.4 inches. The turquoise colored piece was 4 X 3/4 inches. The used dies from a Karen Burniston set to cut the yellow background piece and the light brown scalloped edge piece of pattern paper and layered all the pieces onto the card.
I stamped the sentiment on the top of the top panel of the card, adhered the acorn and used foam tape on the fox and placed it on the card.
I love interactive cards so I decided to make this Triple Flip Card. Be sure to check out the video during the Blog Hop Reveal for a tutorial on how to make it without using dies!
Be sure to check back every day for a new Sneak until the Big Reveal on October 26, 2019, at midnight PST!
Hi Everyone! Luci here with a few cards using the Picket Fence Studios “String of Lights” stamp set.
I love how simple yet lovely these cards were!
To start I picked out A2 size card bases from my stash, cut down white cardstock panels to 4 X 5 1/4 inches. Then I stamped the images and sentiment together using my Mini Misti and Brutus Monroe embossing ink. I picked red, silver, gold, and green embossing powders and heat embossed them. I adhered the card panels to the card bases. Then I simply added some embellishments for one I used sequins from an old SFL FOTM card kit and the rest I used Nuvo Crystal Nuvo Drops, the colors I used were Autumn Red and Silver Lining. Easy Peasy right!
This is a 5 1/2 inch square card. I used a die to cut for squares to make the window from a piece of pattern paper from the Santa’s Workshop paper pad cut to 5 1/2 inches, then I made a template of curtains, traced it onto a different piece of pattern paper and cut it out. I adhered the curtains to the window frame.
I then used a solid blue piece from the paper to use as the background. I stamped all of the images for both cards from the “Merry and Bright” stamp set, colored them with alcohol markers, and cut them out with my Scan N Cut.
Next, I adhered the images to the blue panel and checked on placement every now and then by holding the window frame piece over it. Once I had everything in place I adhered the back panel to the card base and then adhered the front panel to that.
To finish it off I stamped the sentiment onto a white strip of paper and fishtailed the ends, then colored it in, popped it up with some fun foam and adhered it to the center of the card.
My second card is also a 5 1/2 inch square but I made a little differently, I used an SVG file and card out the card base and curtain, then I adhered a piece of acetate to the window frame, I ran the curtain through my Big Kick using the Carta Bella embossing folder “Ogee” to give it some dimension, and then adhered it to the window panel.
I glued a panel that I made by using a technique with Copic markers and rubbing alcohol, glued all the images down and then decided I didn’t like it. So I cut the front panel off and the back of the card with the panel down to about 5 1/4 inches and adhered both to the front of a 5 1/2 inch square card base.
Then I decided I didn’t like the white window frame so I colored it with Copic markers. To finish it off I stamped the sentiment onto a white strip of paper and fishtailed the ends, then colored it in, popped it up with some fun foam and adhered it to the center of the card.
I heat embossed with clear Embossing Powder the floral swag after stamping it with Clear Embossing Ink. I trimmed down the panels to 4 in. X 51/4 in. and used a pink card base and a yellow card base from my stash.
I used Distress Oxides and blended them over the card panels. Then sprayed them with some water and blotted them off.
This is an A2 or 4 1/4 X 5 1/2 inch card. I used the Knit Picky Fall Paper Pad, found a piece I liked and cut it down to 4 X 5 1/4 inches for the front panel. I cut an oval out of the center with a die to create a frame.
I used Sticko “Autumn Pumpkin” and SandyLion “Tree With Leaves” stickers to create a scene. I popped up the images with foam tape to finish off the card.
We would love to see what you make once you get your July FOTM kit! Share your projects on social media using the hashtag #FOTMexoticanimals for a chance to be highlighted on the Scrapping for Less social media accounts!
Check back each day for a new peek until the full release on Saturday August 31, 2019 at midnight PST!
I put the embossing powder down in kind of rows and then tapped off the excess. It mixed the embossing powders that I used but I was OK with that, I even made one with the mixed up embossing powders!
I used sentiments from the set and embossed them with silver embossing powder.
Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here:
Cookie Policy
Hi Everyone! Luci here from My Crazy Craft Life with a couple of cards using the “
Hi Everyone! Luci here from My Crazy Craft Life with a Sneak Peek from the 
Crystal O. Minkler
infoscrappingforless
Kimberly Smith
Lynnea Hollendonner
Luci Manos
Christine Patterson
Stacy Tiedemann