Hello, it’s Stacy from Craftaholicmomma up today on the Scrapping for Less blog with a slimline card featuring the Chickie Baby stamp set by Sunny Studio Stamps and Distress Oxide Inks.
I stamped the images on Neenah 80# Classic Crest Smooth Solar White Card Stock with Memento Tuxedo Black Ink. I used my Ohuhu Alcohol Markers to color them in. I then cut out the images with my Brother Scan n Cut.
I ink blended on a piece of Bristol Smooth Card Stock with Picked Raspberry and Twisted Citron Distress Oxide Inks with a blender brush.
I sprinkled some water droplets on the background and dabbed it up with a paper towel to make it look distressed.
Then I stamped some of the grass images with the Twisted Citron. Popping the chicks up on foam squares and gluing the flowers in place finished off the card. The sentiment was stamped with Versafine Onyx Black Ink.
Hello, it’s Stacy here from Craftaholicmomma up today on the Scrapping for Less blog with a super cute card featuring several products from Sunny Studio Stamps’ newest release. You can find these products at Scrappingforless.com.
I used the Cruising Critters stamp set, the Spring Sunburst 6×6 paper pad and the Heartstring Border Dies to create my card. After stamping my image with Memento Tuxedo Black Ink I colored the image with my Ohuhu Alcohol Markers (Amazon). I die cut a heart border and mounted the image panel onto the striped pattern paper with Gina K Designs Foam Adhesive. The body of the vehicle was stamped on pattern paper and fussy cut so that I could paper piece it in place.
I used a Molotow Chrome Marker (Amazon) to color in the shiny chrome parts of the vehicle like the fenders on the wheel wells and the hub caps.
The sentiment was stamped with Versafine Onyx Black ink.
We have listened to our customers and have given you an entire kit for masculine themed cards. We all know those are difficult cards to make, so for all the men in our lives here is a whole kit dedicated to those wonderful men we need to make cards for.
Head on over to Scrapping for Less to either subscribe or purchase a 1x kit. Make sure you also enter our Rafflecopter as well too!
Here are close up photos of each Collection:
Collection One and Two
Collection Three and Four
Card Stock, Envelopes and the Banana Split Level add ons
It’sJessand I’m back with a second project featuring the adorable stand along release from Scrapping for Less. I love today’s project – maybe even more than my first one! Let’s get started.
I grabbed a few Distress Oxide ink pads and started on my blending. I like to start with my lightest color and blend over the entire area first. Then I go in with my next darker color and blend just slightly less area than with the first color. I keep doing this as I move to each darker color and the end result is a really cool gradient effect with the colors.
After my ink blending was done, I grabbed a sparkle pen from Spectrum Noir and tapped the barrel to get some of that gorgeous clear sparkle to plop right onto my panel. Since the Distress Oxides react with water, I got a really cool effect with this technique.
I set my panel aside to dry and moved on to coloring. I chose to use alcohol markers here (the Spectrum Noir Classique line), but you can use whatever method you’re most comfortable with. Once your coloring is done, you’re ready for a sentiment.
I decided to do some ‘stamp surgery’ as I’ve heard it called. I wanted a more long and narrow sentiment rather than a stacked one, so I cut apart the two lines of text ‘fairy blessings’ and ‘coming your way!’ Then, I used my Mini MISTI to line them up in a straight line across and stamp them onto black cardstock with Embossing Ink. I poured on some white embossing powder, tapped off the excess, and melted the powder with my heat tool.
I adhered my sentiment across the top section of my card and then mounted the card panel on a white A2 sized card base. I’m absolutely in love with how this one turned out. Be sure to let me know what you think about it by leaving a comment!
Hello, it’s Stacy from Craftaholicmomma up today on the Scrapping for Less blog with a wood slice ornament featuring stamps from the new exclusive Winter Fairy Collection.
I recently ordered more wood slices from Amazon. This time I purchased them a little bit bigger than the ones I used for my Christmas ornaments. Those were 2.75″-3″ in size, the ones I just got are 3.75″-4″.
I stamped the fairy and trees from the Winter Fairies stamp set with Memento Tuxedo Black Ink. I then colored the images with my Ohuhu alcohol markers. You could use any alcohol marker or colored pencil to color these in.
I used Nuvo Glitter Accents in Fresh Snowfall to put some dimension on her hat and ground. Nuvo Crystal Glaze added the perfect shine to the star wand. And lastly I added Nuvo Clear Glitter Glaze marker to her wings.
Next I felt she needed a decorative box to put her in. So I took two sheets of the Winter in Pink 6×6 paper and made a box.
For the bottom I scored the sheet at 1″ on all for sides, snipped the corners and taped the edges together with score tape. For the top I cut down the sheet to 5″ square and scored on all four sides at 1/2″ and assembled it the same way. I decorated the top with a triangle scrap I had left over from my Banner I did last week and a white paper doily from Doodlebug. Tying a sheer white ribbon around the box completed my project.
Hi everyone! I’m Beth from Bourbon Creek Crafts and I’m super excited to be a guest designer this month for SFL! Today I’m sharing a different way to use the Winter Fairies stamp set and Winter in Pink paper pack. I needed some thank you gifts for a birthday party my daughter ishavingand this bundle was perfect!
I made a decorated post itnotepad holder using one of the fairies and sentiments from the Winter Fairies stamp set.I also have a process video on my YouTube channel, Bourbon Creek Crafts. I colored the fairy with a variety of Prismacolor colored pencils and then accented her hat withNuvoGlitter Drops in White Diamond and glittered up her wings(and the star on the wand)with clear Wink of Stella. Because every good fairy should have some sparkle!
To make the post it note holder, I used a 3 1/4 x 7 inch piece of heavy duty white cardstock. I scored the cardstock piece at 3 1/4 inches from both ends. Then I used 2 different papers from the Winter in Pink 6×6 paper pack to decorate the cardstock. I cut the patterned paper to 3 1/8 inches square, so there was just a small border of the white cardstock base showing and adhered it to the post it note holder base.
I stamped the “a warm fairy hello” onto white cardstock and cut it down to ¾ inch by 1 3/8 inches. I also cut one end of that piece into a fish-tail banner. I fussy cut the fairy and adhered the fairy and the sentiment to the front of the post it note holder. Then I finished it off with some sequins from past SFL Flavor of the Month kits.
Thanks for stopping by today! I hope you enjoyed my project! I look forward to joining you all again later this month!
Hello, it’s Stacy here from Craftaholicmomma today on the Scrapping for Less blog with a paper craft project featuring all three products from the brand new SFL release, Winter Fairy.
My daughter’s birthday is coming up at the end of January so I wanted to make her something she could use at her party and then afterwards hang in her room.
This banner was very simple. I did not use any dies, just minimal supplies.
First I stamped and colored all of the main images from the two stamp sets, Winter Fairies and Fairy House. I’ve heard lots of good things about the Ohuhu Alcohol Markers from Amazon so I wanted to give them a try. I love my Copics but sometimes I want a bullet nib. So I purchased the 200 pack bullet nib markers at a very reasonable price (50 cents a marker). I was very pleased with them. They were all very juicy.
I listed the colors I used for each image.
I used my Brother Scan n Cut to cut out my images including the snowflakes.
Next I picked out 6 sheets of the new SFL Winter in Pink 6×6 paper pack. I trimmed these to 5 1/4″ square. Next I measured the bottom edge halfway (2 5/8″) and made a mark.
Next I connected the two upper corners with my mark, drew a line and then cut on the two lines to form my banner piece.
I wanted to mat the paper on white card stock. So the card stock is cut a little bit bigger at 5 1/2″ square. I repeated the same process marking my edge at 2 3/4″.
Next I took a hand held hole punch and punched two holes in the upper corners of all 6 pieces. This is where I will later string my ribbon through.
Next I popped up my images on adhesive foam tape and centered them on the banners.
I finished decorating them with the snowflakes and adhesive bling. I ran pink ribbon to connect them and Viola! I made a seriously adorably cute banner in less than one hour!
Thanks for visiting and enjoy all of the beautiful projects the design team creates this month with this brand new Winter Fairy release.