For this first card, I stamped the image on 110lb Neenah Solar White card stock. I am making an A2 size card I used a stitched oval die to cut out a frame for the card. I used a powder blue color card base and cut one of the pieces of pattern paper down to 4 1/4 X 5 1/2, so the piece is the size of the card with no borders. I used a stitched oval die to create a frame from the pattern paper. Then I adhered the floral design to the card base and used foam tape to pop up the frame piece and adhered it while lining it up. I stamped the sentiment on the same type of paper and cut the thin strip to about 4 inches and fishtailed the ends. I adhered the sentiment to the card panel toward the bottom leaving some of the frame hole showing on the bottom. I used Crystal Nuvo Drops and some sequins from my stash to finish off the card.
For the second card, I stamped the image on Strathmore Colored Pencil paper, the card is A2 size and I cut the back panel from pattern paper to 4in X 5 1/4in to leave a border from the dusty pink color card base I used. I used a stitched oval die to cut out the image, used “Worn Lipstick” Distress Oxide Ink to give some color just to the outer edge of the oval. Then I cut out an oval the next size up from the same colored pencil paper and layered it behind the oval with the image. I adhered that piece toward the bottom center of the card, stamped a sentiment from the same paper, cut out the strip, fishtailed one end and adhered it to towards the top of the card. I finished off the card by adding some Crystal Nuvo Drops.
For my final card, I stamped the image on Strathmore Colored Pencil paper, the card is A2 size and I cut the back panel from pattern paper to 4in X 5 1/4in to leave a border from the Neenah Solar White card base I used. I then used strips to crisscross measuring 2in X 4 1/4in and 1 3/4in X 5 1/2in. The image I cut down to 2 1/2in X 3 3/4in and adhered it to a rectangle piece measuring 3 1/4 X 4 1/2in. I stamped the sentiment directly onto the image paper and finished it off with some Nuvo Stone Drops.
You can head over to Scrapping for Less for these products and more!
Card 1 is an A2 size card, I cut the gold glitter paper to 4 1/4 X 5 1/5 and a piece of the pattern paper to 3 X 5 1/2 inches. I adhered the glitter paper to the card base and then centered the pattern paper and adhered it. I used glue dots to adhere the tag so the person receiving it could use if they want!
Card 2 is an A2 size card and I cut a piece of pattern paper to 4 1/4 X 5 1/2 inches and adhered it to the card base. I cut a piece of silver glitter paper cut to 4 1/2 X 3 inches. I used my cropadile on the front two ends of the card and glitter paper, then I centered the glitter paper and adhered it to the panel. I added the tag on to the glitter paper and that’s it!
Card 3 is an A2 size card and I cut two panels from the pattern paper to about 1 9/16 inch and a piece of the silver glitter paper to 1 1/8 inch. After I adhered all the panels, I added a tag to the inside of the card and that finished that one up.
For my final card I cut a panel from the pattern paper to 4 X 5 1/4 inches to leave a border around the A2 size card. I adhered the tag to a scalloped rectangle that I cut out with a die that was just a little longer than the tags and slightly wider. I added the rectangle piece a little off center on the card.
That’s it for me today! Be sure to check out Scrapping for Less for all the sales!