Hello, it’s Stacy from Craftaholicmomma up today on the Scrapping for Less blog with a slimline card featuring the Chickie Baby stamp set by Sunny Studio Stamps and Distress Oxide Inks.
I stamped the images on Neenah 80# Classic Crest Smooth Solar White Card Stock with Memento Tuxedo Black Ink. I used my Ohuhu Alcohol Markers to color them in. I then cut out the images with my Brother Scan n Cut.
I ink blended on a piece of Bristol Smooth Card Stock with Picked Raspberry and Twisted Citron Distress Oxide Inks with a blender brush.
I sprinkled some water droplets on the background and dabbed it up with a paper towel to make it look distressed.
Then I stamped some of the grass images with the Twisted Citron. Popping the chicks up on foam squares and gluing the flowers in place finished off the card. The sentiment was stamped with Versafine Onyx Black Ink.
Hello, it’s Stacy here from Craftaholicmomma up today on the Scrapping for Less blog with a super cute card featuring several products from Sunny Studio Stamps’ newest release. You can find these products at Scrappingforless.com.
I used the Cruising Critters stamp set, the Spring Sunburst 6×6 paper pad and the Heartstring Border Dies to create my card. After stamping my image with Memento Tuxedo Black Ink I colored the image with my Ohuhu Alcohol Markers (Amazon). I die cut a heart border and mounted the image panel onto the striped pattern paper with Gina K Designs Foam Adhesive. The body of the vehicle was stamped on pattern paper and fussy cut so that I could paper piece it in place.
I used a Molotow Chrome Marker (Amazon) to color in the shiny chrome parts of the vehicle like the fenders on the wheel wells and the hub caps.
The sentiment was stamped with Versafine Onyx Black ink.
It’sJessand I’m back with a second project featuring the adorable stand along release from Scrapping for Less. I love today’s project – maybe even more than my first one! Let’s get started.
I grabbed a few Distress Oxide ink pads and started on my blending. I like to start with my lightest color and blend over the entire area first. Then I go in with my next darker color and blend just slightly less area than with the first color. I keep doing this as I move to each darker color and the end result is a really cool gradient effect with the colors.
After my ink blending was done, I grabbed a sparkle pen from Spectrum Noir and tapped the barrel to get some of that gorgeous clear sparkle to plop right onto my panel. Since the Distress Oxides react with water, I got a really cool effect with this technique.
I set my panel aside to dry and moved on to coloring. I chose to use alcohol markers here (the Spectrum Noir Classique line), but you can use whatever method you’re most comfortable with. Once your coloring is done, you’re ready for a sentiment.
I decided to do some ‘stamp surgery’ as I’ve heard it called. I wanted a more long and narrow sentiment rather than a stacked one, so I cut apart the two lines of text ‘fairy blessings’ and ‘coming your way!’ Then, I used my Mini MISTI to line them up in a straight line across and stamp them onto black cardstock with Embossing Ink. I poured on some white embossing powder, tapped off the excess, and melted the powder with my heat tool.
I adhered my sentiment across the top section of my card and then mounted the card panel on a white A2 sized card base. I’m absolutely in love with how this one turned out. Be sure to let me know what you think about it by leaving a comment!
Hello, it’s Stacy here from Craftaholicmomma today on the Scrapping for Less blog with a paper craft project featuring all three products from the brand new SFL release, Winter Fairy.
My daughter’s birthday is coming up at the end of January so I wanted to make her something she could use at her party and then afterwards hang in her room.
This banner was very simple. I did not use any dies, just minimal supplies.
First I stamped and colored all of the main images from the two stamp sets, Winter Fairies and Fairy House. I’ve heard lots of good things about the Ohuhu Alcohol Markers from Amazon so I wanted to give them a try. I love my Copics but sometimes I want a bullet nib. So I purchased the 200 pack bullet nib markers at a very reasonable price (50 cents a marker). I was very pleased with them. They were all very juicy.
I listed the colors I used for each image.
I used my Brother Scan n Cut to cut out my images including the snowflakes.
Next I picked out 6 sheets of the new SFL Winter in Pink 6×6 paper pack. I trimmed these to 5 1/4″ square. Next I measured the bottom edge halfway (2 5/8″) and made a mark.
Next I connected the two upper corners with my mark, drew a line and then cut on the two lines to form my banner piece.
I wanted to mat the paper on white card stock. So the card stock is cut a little bit bigger at 5 1/2″ square. I repeated the same process marking my edge at 2 3/4″.
Next I took a hand held hole punch and punched two holes in the upper corners of all 6 pieces. This is where I will later string my ribbon through.
Next I popped up my images on adhesive foam tape and centered them on the banners.
I finished decorating them with the snowflakes and adhesive bling. I ran pink ribbon to connect them and Viola! I made a seriously adorably cute banner in less than one hour!
Thanks for visiting and enjoy all of the beautiful projects the design team creates this month with this brand new Winter Fairy release.
This project was not my original idea as I’ve seen it around on Pinterest and such. I just loved the idea! I though I “wood” make these for my daughters teachers, paras and classmates for Christmas. They make a very cute gift or stocking stuffer for a friendly cost.
I stamped the images from the MFT Sweater Weather in the Woods stamp set with Memento Tuxedo Black Ink. I then colored the images with my Spectrum Noir Alcohol Markers. I read somewhere that they had better luck with no bleeding if they used their Spectrum Noirs. The COPIC Markers with the brush bibs tend to bleed on the wood. I think the key is to use a marker with a bullet nib. I guess the best thing to do is to sacrifice one of the wood slices and try out different markers on it and see which one works best for you.
The other cool thing about these wood slices is that they come already pre-sanded and pre-drilled with holes. Plus a big wad of rustic twine was included.
So if you’re looking for quick and easy gift try making these wood slice ornaments. Your recipients will love them!
Kim here with one of the sweetest stamp sets from Sunny Studio Stamps, Fall Kiddos. I had so much fun coloring up these little guys and gals. I stamped out all the images using Lawn Fawn ink in jet black which is alcohol marker friendly. Then I got busy coloring with my Copics.
I really thought all of my characters were going to go on the card until I started putting everyone in place and realized that just wouldn’t work unless I made them stand on each other and they needed room to jump and throw leaves! I picked out a few for this card and set my other little kiddos aside for another time. Once I got knew where I wanted them to go I was able to position my sentiment which I then stamped in Versafine Ink black onyx, used clear embossing powder on and heat set. (I even remembered to use powder buddy so the embossing powder wouldn’t stick where I didn’t want it, go me!)
It needed one more thing so I got out the fluffy cloud dies from Sunny Studio Stamps, cut out some clouds, inked them up just a bit with tumbled glass distress oxide ink and my sky came together. Added some bling with a Spectrum Noir sparkle marker in clear and adhered it to a card base using Lawn Fawn glue tube.
I just love the sentiment on this card from the Fall Kiddos stamp set and completely agree that playing is NEVER wasted time.
Thank you so much for stopping in and spending some time with us today. I hope you are able to find some time to play today.
This is an A2 or 4 1/4 X 5 1/2 inch card. I used the Knit Picky Fall Paper Pad, found a piece I liked and cut it down to 4 X 5 1/4 inches for the front panel. I cut an oval out of the center with a die to create a frame.
I used Sticko “Autumn Pumpkin” and SandyLion “Tree With Leaves” stickers to create a scene. I popped up the images with foam tape to finish off the card.
Both of these are A2 size cards or 4 1/4 in. X 5 1/2 in. and both card bases are from my stash.
For the first card, I used the “Wild Animals Paper Pad” and used the sheet as a panel that was cut to 4 in. X 5 1/4 in. I colored the chameleon and flower with Studio 71 alcohol markers and used my Scan N Cut to cut the images out. I cut out a circle with a stitched circle die and then put it on overlapping the panel and cut off the end. I used the same paper as the circle to heat emboss the sentiment, and I popped up both the chameleon and sentiment. On the inside of the card, I added another sentiment from the stamp set that said: “Don’t ever change”. I used the Spectrum Noir Sparkle Pen on the chameleon image.
For the next card, I blended Twisted Citron, Lucky Clover, and Peeled Paint, over the Palm Leaf stencil and a piece of the pattern paper from the “Wild Animals” paper pad. I love how it turned out! I cut it down to 4 in. X 5 1/4 in. I stamped the sentiments from the stamp set with Versafine Onyx Black Ink. Popped on the Doodle Pop Koala and used a few sequins from a previous FOTM kit.