Hi Everyone! Luci here with a few Super Simple No Die Shutter Cards using the Brand New Release from SFL the “Winter in Pink” paper pad, the stamp sets “Winter Fairies” and “Winter Fairy House“! How adorable are these sets!
Be sure to check out the process video for step by step instructions HERE!
I used Copic markers for the Fairy on the inside of the card and Prismacolor pencils for the two fairies on the outside of the card.
Hi Everyone! Luci here with a single layer card using the Brand New Release from SFL “Winter Fairies” and “Fairy House“! How adorable are these sets! I colored the images and created the scene with Copic Markers, and I finished up the card by stamping the sentiment with VersaFine Onyx Black Ink added a few sequins and you can’t have Fairies without some Spectrum Noir Sparkle Pen!
I made an A2 size card or 5 1/2 X 4 1/4 inches, I cut a panel to 5 1/4 X 4 inches for the scene. I made some masks for the images, I stamped and masked as I went, using Momento Tuxedo Black Ink for stamping the images I was going to color. I drew in some hills with a pencil before I started coloring. I colored the panel. Once I finished coloring I adhered the panel to the card base, added a few sequins and used the Sparkle Pen on tops of hills, the roof, the white parts of her hat, and the accents on her dress and shoes.
For all of these cards, I used the Nuvo Drops over the stencils and let it dry about an hour in a half to two hours.
This card is a 5 1/2 inch square card base. I used the largest heart die and cut it out the abstract stencil, then I used the second to the smallest heart for the sentiment that I cut out from white cardstock, I cornered the right edge of the card base. I stamped the sentiment on the small heart. I adhered the heart onto the card base in the center and then popped up the sentiment heart in the middle of the large heart. to finish it up I used some sequins.
This card I made similar to the first except its A2 size or 4 1/4 X 5 1/2 inch card base in pink and I used a piece of pattern paper that I cut down to 4 X 5 1/4 inches for the back panel. I cut out the largest flower from a stenciled piece and then the second smallest one for the sentiment in white. Stamped the sentiment on the smaller flower. Layered it onto the card base and finished it off with a few sequins.
My final card is A2 sized and I used a black card base. I cut down the stenciled piece to 4 X 5 1/2 inch and adhered it to the card base. I used a piece I smeared the stone drops on to cut out the hello sentiment from the die and a piece of black card stock for the shadow. I adhered it to the center of the card. I used some black sequins and I used the sparkle pen all over the sentiment and shadow.
Hi Everyone! Luci here from My Crazy Craft Life with a few cards using the Gina K Designs “Sweet Friendship” stamp set, Spring Patterns paper pack from Scrapping for Less, some Crystal Nuvo Drops, Stone Nuvo Drops, and a few sequins!
I colored all of these images with Prismacolor Premier Pencils, I’ve added the photos of the pencil numbers next to each photo!
For this first card, I stamped the image on 110lb Neenah Solar White card stock. I am making an A2 size card I used a stitched oval die to cut out a frame for the card. I used a powder blue color card base and cut one of the pieces of pattern paper down to 4 1/4 X 5 1/2, so the piece is the size of the card with no borders. I used a stitched oval die to create a frame from the pattern paper. Then I adhered the floral design to the card base and used foam tape to pop up the frame piece and adhered it while lining it up. I stamped the sentiment on the same type of paper and cut the thin strip to about 4 inches and fishtailed the ends. I adhered the sentiment to the card panel toward the bottom leaving some of the frame hole showing on the bottom. I used Crystal Nuvo Drops and some sequins from my stash to finish off the card.
For the second card, I stamped the image on Strathmore Colored Pencil paper, the card is A2 size and I cut the back panel from pattern paper to 4in X 5 1/4in to leave a border from the dusty pink color card base I used. I used a stitched oval die to cut out the image, used “Worn Lipstick” Distress Oxide Ink to give some color just to the outer edge of the oval. Then I cut out an oval the next size up from the same colored pencil paper and layered it behind the oval with the image. I adhered that piece toward the bottom center of the card, stamped a sentiment from the same paper, cut out the strip, fishtailed one end and adhered it to towards the top of the card. I finished off the card by adding some Crystal Nuvo Drops.
For my final card, I stamped the image on Strathmore Colored Pencil paper, the card is A2 size and I cut the back panel from pattern paper to 4in X 5 1/4in to leave a border from the Neenah Solar White card base I used. I then used strips to crisscross measuring 2in X 4 1/4in and 1 3/4in X 5 1/2in. The image I cut down to 2 1/2in X 3 3/4in and adhered it to a rectangle piece measuring 3 1/4 X 4 1/2in. I stamped the sentiment directly onto the image paper and finished it off with some Nuvo Stone Drops.
You can head over to Scrapping for Less for these products and more!
Hi Everyone! Luci here with a Sneak Peek from the November 2019 Flavor of the Month Card Kit! The Theme is A Vintage Christmas and check out this guy that’s part of it!
Be sure to grab your kit if you’re not subscribed at Scrapping for Less!
I had to show the sparkle I added to his hat!
Be sure to check back each until the final reveal on November 30, 2019 at 12:00 am (PST!
Hi Everyone! Luci here with four fun and quick cards using Kaisercraft Silver Bells Tags, Sticky Back Glitter Paper from Darice in Silver and Gold, and Carta Bella Paper Pad Santa’s Workshop.
Card 1 is an A2 size card, I cut the gold glitter paper to 4 1/4 X 5 1/5 and a piece of the pattern paper to 3 X 5 1/2 inches. I adhered the glitter paper to the card base and then centered the pattern paper and adhered it. I used glue dots to adhere the tag so the person receiving it could use if they want!
Card 2 is an A2 size card and I cut a piece of pattern paper to 4 1/4 X 5 1/2 inches and adhered it to the card base. I cut a piece of silver glitter paper cut to 4 1/2 X 3 inches. I used my cropadile on the front two ends of the card and glitter paper, then I centered the glitter paper and adhered it to the panel. I added the tag on to the glitter paper and that’s it!
Card 3 is an A2 size card and I cut two panels from the pattern paper to about 1 9/16 inch and a piece of the silver glitter paper to 1 1/8 inch. After I adhered all the panels, I added a tag to the inside of the card and that finished that one up.
For my final card I cut a panel from the pattern paper to 4 X 5 1/4 inches to leave a border around the A2 size card. I adhered the tag to a scalloped rectangle that I cut out with a die that was just a little longer than the tags and slightly wider. I added the rectangle piece a little off center on the card.
That’s it for me today! Be sure to check out Scrapping for Less for all the sales!
Blog http://mycrazycraftlife.blog
Instagram www.instagram.com/mycrazycraftlife
YouTube http://www.youtube.com/channel/UCpJ5JXW3iHw91y__rLvkrcA
Pinterest https://www.pinterest.com/honeysworld10/
To create this card I started with an A2 size cardbase or 4 1/4 X 5 1/2 inches. I used Neenah Solar White 110lb cardstock. I stamped the images I wanted to use with Memento Tuxedo Black Ink and colored them with copic markers. I used my Scan N Cut to cut the images out.
I cut the glitter paper for the front panel to 4 1/4 X 5 1/2 inches and cut out a 3 1/4 inch circle towards the top center of the card and then cut out another circle from white card stock with a 3 1/2 inch die.
I adhered all of the tree images to the 3 1/2 inch circle panel and popped the mouse images up with some foam dots. I adhered the 3 1/2 inch circle to the top of the card base and then adhered the glitter paper to the card base lining up the circles. I stamped the sentient “Cold Hands” from Hero Arts Ink in Moss on a white strip of card stock. I cut the banner down to 4 1/4 X 3/4 inches and adhered it towards the bottom of the card with some foam tape.
To finish it off I stamped on the inside of the card the sentiment “Warm Heart”, as well as, the image of the mittens with the string of them creating a heart. I colored in the mittens with copic markers.
Blog http://mycrazycraftlife.blog
Instagram www.instagram.com/mycrazycraftlife
YouTube http://www.youtube.com/channel/UCpJ5JXW3iHw91y__rLvkrcA
Pinterest https://www.pinterest.com/honeysworld10/
This is an A2 size card or 4 1/4 X 5 1/2 inches. I used a dark brown card base from my stash. I stamped the leaves on the back of the glitter paper and scanned through my Scan N Cut, then I flipped the glitter paper over so the glitter side was facing up and let the machine cut out the images. I stamped the images of the fox and acorn from the stamp set and colored them with Copic markers (colors in the photo below). I didn’t color the leaf of the acorn because I stamped that on the back of the Glitter paper and cut it too.
Once I finished up the images I used the Lawn Fawn Knock on Wood Paper Pad and cut the back panel in orange to 4 X 5 1.4 inches. The turquoise colored piece was 4 X 3/4 inches. The used dies from a Karen Burniston set to cut the yellow background piece and the light brown scalloped edge piece of pattern paper and layered all the pieces onto the card.
I stamped the sentiment on the top of the top panel of the card, adhered the acorn and used foam tape on the fox and placed it on the card.
Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here:
Cookie Policy
Hi Everyone! Luci here with a Sneak Peek from the December 2019 Flavor of the Month Card Kit! The Theme is Sending Love!
Crystal O. Minkler
infoscrappingforless
Kimberly Smith
Lynnea Hollendonner
Luci Manos
Christine Patterson
Stacy Tiedemann